Power Cube VIII Collaborative Production Run

From Open Source Ecology

Revision as of 22:45, 27 December 2013 by KhalidH (talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

See Power Cube 6 for latest Power Cube Documentation. Tom is currently building Power Cube VII - optimizing form factor for ergonomics. The power cube after that is Power Cube VIII. See Machine Naming Convention.

Date

Slated for Sat Nov 9 - Sun Nov 10.
Tom Griffing is Guest Collaborative Production Run Director

Preparation

Lathe up and running for spline coupler
- Tom has a coupler jig
Lathe gearing via PowerCube + 6 Spline PTO Motor

BOM

How much of http://opensourceecology.org/wiki/Power_Cube_6/Bill_of_Materials is still accurate?

Fabrication Diagram

See Fabrication Diagram explanation.

Fabrication

Coupler -

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Power_Cube_VIII_Collaborative_Production_Run&oldid=113157"

Power Cube