Tibor Log

Tue July 8, 2013

Working on new Warehouse, instructions on Warehouse Development Brief

• I'm not sure about inner/outer radius on 1/4 or 1/2 thick square tube profile. Can someone in workshop measure it? I will continue on this tomorow.
• Any suggestion to filenaming? I use schema Warehouse-<name>-<modificator>, example: Warehouse-SquareTube-Thin

Wen Jun 26, 2013

Created Sketchup model of 3 Inch Wheel Hub: File:3-inchHub1.skp, File:3-inchHub2.skp

• I don't know if the dimensions in the 1st file are ok, I'm not familiar with LibreCAD yet.
• Can be lower collar on 2nd file welded directly to the 24" round wheel plate, or i must add another round plate, with 4 holes to bolt it there?

Created some new plates for cylinder mounting: File:New-plates-suggestion.skp

• They would be used instead of rectangular 8x8 or 8x12 plates.
• On red axis are variations of the same plate, with different fabrication process.
• Do you find it usefull?

Sun Jun 23, 2013

Start QC of Backhoe Legs and Feet. Found technical problem with last version of File:Backhoe stabilizerarms1.skp:

- there is not enough place for moving legs up, they would be wider that LifeTrac in max upper position.

- do we need this module? Aditional stability can be achieved with laying down the LifeTrac arm. It is not enough?

Sat Jun 22, 2013

Tibor's work sample - [1]. Got him do to Quality Control

Quick info

Name: Tibor Soviš

Country: Slovakia

Timezone: GMT+0200 (CST+8)