Lasersaur Exterior Panel Installation

From Open Source Ecology
Revision as of 17:15, 3 June 2014 by Cristobal Aguas (talk | contribs) (Created page with "==Mon 2 Jun 2014== It's important to note that when installing the Lasersaur's exterior skin, the factory-drilled holes differ in distance from the edge of the aluminum plate ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Mon 2 Jun 2014

It's important to note that when installing the Lasersaur's exterior skin, the factory-drilled holes differ in distance from the edge of the aluminum plate by about 1mm. This means that one side will be closer to the edge of the frame (or if installed upside down may protrude beyond the edge of the frame). So, make sure the panel is not upside down when installing to eliminate any misalignment of panels.

See the Lasersaur Manual online to see where the additional holes should be drilled on the panels and plastic door panels, or see Cris Log

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Lasersaur_Exterior_Panel_Installation&oldid=119939"