Torch Height Controller

Based on Paul Log - here is height controller, using the Capacitive to Digital Converter chip AD7747

Hello Anthony/Marcin,

Thank you for your order, please confirm you require our Plus Service for "Open Source ecology" as your data included solder masking and a top legend, however you requested our Basic Service which does not include these options. Your two PCB order with out Plus Service as shown in the attached image file is $21.96 US before shipping handling and taxes on a three business day turn. We require your confirmation of Service Type to proceed with manufacturing.

Best Regards, Support

Description of attached images :

  o 271467_1.png : PLUS SERVICE

We are holding your order until we will receive authorization to proceed or we receive your layout modifications.

Please review the attached JPG(s) and advise us how to proceed. Red is Top layer, Blue is Bottom layer, and Green is Drill locations. Note: Bright White pad locations indicate plated hole locations.

When regenerating new data please send a complete zip package containing: Gerber files, apertures if necessary, NC drill file, tool list, and an order form to support@apcircuits.com referencing your original order number.

Should you have any additional questions, or require additional data, please contact us, at your earliest convenience.

Thank you.

AP Circuits (403)250-3406 (403)250-3465 Fax support@apcircuits.com