D3D CNC Circuit Mill

CAD

Note on CAD Procedure and Organization:

1. Begin the design by downloading the X axis - File:D3D 16 Sub-assembly X Axis.fcstd
2. Correct the length of the axis to 11" length (for 13" frame - 1" shorter on each side to accommodate mounting on the Y axes). Rotate the axis such that the orientation - when looking according to the Viewing Direction and XYZ axis orientation of Slide 1 in Working Document - is that the motor is on the left side of the axis (note that the orientation shown in First Slide in the Working Document has the motor on the right hand side, which is not correct).
3. Once the length is 11" and orientation is correct, save the file as File:D3D Circuit Mill X Axis.This will be the file you can use later to merge into the final assembly - with the second x axis being a mirror image

• Assembly:File:D3D Circuit Mill.fcstd
• Spindle Motor: File:T-king spindlemotor.fcstd

Working Document

edit

Industry Standards

Open Source

• Cyclone PCB Circuit Mill
• Sienci Mill