Revision as of 13:34, 17 March 2018 by Marcin(talk | contribs)(Created page with "*How to align a workpiece in 4-jaw independent (off-center) chuck using a dial indicator and a sharpened point - [https://www.youtube.com/watch?v=ptmxSjxWM70] *Aligning tail p...")
How to align a workpiece in 4-jaw independent (off-center) chuck using a dial indicator and a sharpened point - [1]
Aligning tail piece to chuck - first use a very straight rod (such as cylinder rod) and then set adjustment screws on tailstock to move side to side. What about up and down? [2]