Wire Arc Additive Manufacturing

From Open Source Ecology
Revision as of 20:38, 14 February 2019 by Marcin (talk | contribs) (Created page with "*Laser + TIG setup? - https://www.addere.com/addere-i *Electron beam and laser beam can be used - [http://www.sciaky.com/additive-manufacturing/wire-am-vs-powder-am] *Is hot w...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • Laser + TIG setup? - https://www.addere.com/addere-i
  • Electron beam and laser beam can be used - [1]
  • Is hot wire TIG used for 3D printing?
  • TIG additive - Korea - [2]
  • Paper on cold and hot wire TIG - [3]
  • RepRap metal printer with TIG - [4]
  • StrongPrint TIG with wire feed - [5]
  • Review paper on Wire Arc Additive Mfg - WAAM - "The paper concludes that WAAM is a promising alternative to traditional subtractive manufacturing for fabricating large expensive metal components. [6]
  • Companies producing cold weld spray 3d printing - [7]
  • Metal arc from Prodways? - [8]. They call it forging, but it appears to be simple welding with shielding gas (SMAW)
  • WAAM article - [9]
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Wire_Arc_Additive_Manufacturing&oldid=185844"