Spring Steel Wire

From Open Source Ecology

Revision as of 07:30, 2 January 2020 by Marcin (talk | contribs) (→‎Working Doc)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

In the D3D Universal 3D printer extruder, we are using 1.25 mm spring steel - or 0.05 inch wire.

Welding wire is 0.035" - close to the diameter - but much lower strength - at 70ksi.

Spring steel wire is 260 ksi - about 4x stronger! [1]

Working Doc

Sourcing

McMaster - [2]

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Spring_Steel_Wire&oldid=207430"