D3D v20.04

From Open Source Ecology

Revision as of 03:32, 3 April 2020 by Marcin (talk | contribs) (→‎Heater Element)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Specifications

12" heat bed
1400W heat bed
Transitioning to OSE Universal Gearless Extruder
Based on D3D Pro geometry

Heater Element

Notes:

Fiberglass sleeve used - HTG fiberglass, does not flake off like standard high temperature sleeving. See [1]
Inner core: 5' long wraparound of 2mm tight braid fiberglass sleeve - 600C - [2]
This is packed into 6' of 6 mm tight braid fiberglass sleeve.

Retrieved from "https://wiki.opensourceecology.org/index.php?title=D3D_v20.04&oldid=215654"