D3D v20.04

Specifications

• 12" heat bed
• 1400W heat bed
• Transitioning to OSE Universal Gearless Extruder
• Based on D3D Pro geometry

Heater Element

(See Nichrome Calculator)

Notes:

• Fiberglass sleeve used - HTG fiberglass, does not fray like standard high temperature sleeving (1000F) and is rated for . See [1]. Note that the resin can burn out at the 650C (1200F) workign temp. Sleeve has VW-1 flame resistance. Made of fiberglass, it does not burn out, but may fuse and lose fiber structure.
• Inner core: 5' long wraparound of 2mm tight braid fiberglass sleeve - 600C - [2]
• This is packed into 6' of 6 mm tight braid fiberglass sleeve.

Heater Optimization

• 20 feet of 20 ga wire appears to be most convenient - 1 piece, max at 1200F. Current 500W heater is 1200F max, and works well.