Open Source Filament Extruder
Basics
- OSE's Work on a Device for converting Plastic Pellets and/or Plastic Flakes into FDM 3D Printer Filament
- As of now most work is occuring on [[Lyman Filament Extruder, but this will turn into a more ose optimized version as it forks more and more from the original lyman
Requirements
Analysis of Industry Standards/Prior Work/Patents/Tech Tree of Choices
We go from Tech tree of choices -> Industry Standards -> Technology Assessment -> Value Proposition
- These are all the different ways to implement an extruder for a 3D printer.
- Hit Ctrl-mouse scroll to zoom in
See Also
Useful Links
I would say as of now - it is not quite ready for prime time -- we have had trouble of one kind or another with all of the kickstarter versions -- one more should be on the way to me for testing. Our own device I think is still overbuilt and needs another iteration before I would think about workshops - -particularly as I am not happy with the cross cut shredder as a final solution - it is not open source and it wears out on heavy use. The other group that is pretty far along is Protoprint -- I just talked to them - and they hope to finish their final design and open source the plans this summer -- that might be the best bet because they have a shredder too. All of the kickstarters are essentially only good for pellets.