D3D v20.04.27 Future Work

From Open Source Ecology
Revision as of 03:39, 1 May 2020 by Marcin (talk | contribs)
Jump to navigation Jump to search

Future Work

Specific Immediate Items

  • Simplify Universal Axis from clamshell to monolithic for Motor and idlder side.
  • Retain carriage side, or fix it? Only compelling reason is taking the X axis off. But we could redesign the X so it cna be independent of the Y. If we take off X with 2 bolts, service on X or Y allows for whole X and Whole Y to be taken off easily - the Y does not mix with X.

Production Engineering

  • Too much cleanup on X-Y joints. Rework the production engineering so that printing can be by default more clean. Probably do a joint between one-piece motor and one-piece carriage.
    • Is any of this due to print settings and/or nozzle size?

Later Work

Bug Reports

  • fix the Y carrieage to X pieces so both carriages are external.