Seed Home v2 Conceptual Design
Jump to navigation
Jump to search
Wall Interface Detail
Engineering Verification
Hello,
We would like to ask you if you can verify our structural engineering detail for the walls of a single-story residential construction. The house is on slab on grade, and we are building using 4'x9' wall panels. These are 2x6 lumber framed panels with a 24" on center stud. The panels sit on a sill plate. Please see the concept document attached.
Our question is - is the panel-wall design structurally sound? We are using a top plate for shear stabilization of adjacent panels. Adjacent panels are fastened together using nails or screws.
Thanks, Marcin
Frost Protected Shallow Foundation Design Guide
- From US HUD - [1]
Possible Shapes
Foundation
Utility Panel Detail
General Design Concept
- Based on Seed Eco-Home, Open Building Institute modules
- Grow home - expands as needed
- Helical pier
foundation preferred. The Slab Decision. - Modular - prebuilt modules allow for weekend build, and then full build in 1 week with 2 people
- Land is not included
- Includes biodigester and PV options for off-grid operation
- Also see Onsite Power Generation and Storage-To-Grid
- Roof area and all that will aid in calculations