Trellis Procedure Notes

• install first trellis. Use successive overlap. Trellis had 15 inch cuts, for 18" width total.
• Lag bolts every 1 foot. Started with 4-6 3" deck screws, right at top z flashing.
• First trellis started in northeast side. Put band on. But then band needed to be moved east due to successive overlap.
• Used triangle supports.
• Used blocking to support band 1.5" lower, but some places band was even with trellis.
• Used blocking on leading end of trellis as support and alignment for next trellis, to save on using triangle supports. Built 4 triangle supports sufficient for one side of house