3D Printed Stencils

Basics

• Stencils made using 3D Printing (Typically FDM 3D Printing )
• Due to their thin nature it is cents worth of filament, but provides a high quality drafting tool
• May also work with Layout Fluid to allow for hand engraving intricate designs / highly legible text and symbols into metal with nothing but a FDM 3D Printer and a Rotary Tool

• A Design Posted to the website Printables by "X" Titled "X"

Existing Open Source Designs

Academic Symbols

• *A Design Posted to the website Printables by "Bored_coat" Titled "Chemistry stencil"
• *A Design Posted to the website Printables by "John" Titled "Day 12: Organic Chemistry Card"

Drafting

• *A Design Posted to the website Printables by "Ghrrum" Titled "Pocket Drafting Stencil"
• *A Design Posted to the website Printables by "How._." Titled "Alphabet Stencil"
• *A Design Posted to the website Printables by "NagyBig" Titled "Circle helper target stencil"

Drill/Router Stencils

• This won't go into Drill Jigs / 3D Printed Jigs , but:
  • *A Design Posted to the website Printables by "TheFrog69" Titled "Large Modular Router Template Stencil Letters & Numbers 106mm Tall"
  • *A Design Posted to the website Printables by "m3d" Titled "Drill Stencil for Cabinet Door Hinges - Bohrschablone für Topflochscharniere"
• I can't seem to find it, it may be an OTS thing made with injection molding, but a stencil for Can Light marking up would be quite useful
  • Especially on that commercial job we were putting piles of Can Lights into a Soffit so the Laser Level helped, but then you basically had dots/hatch marks and then used a Hole Saw to kind of see things out pre-drilling, having one person zooming by with a pencil and stencil may reduce time wastage

Flowcharts

• *A Design Posted to the website Printables by "Syentri" Titled "UML stencil in A6 format"

Journaling/List Making Stencils

• *A Design Posted to the website Printables by "Eddie Prints" Titled "Post-It Note Checklist Stencil"
  • works pretty well, although be sure to have what will be the top face flat down on the bed, it cannot print in mid air (obviously) (absolutely know this in an academic sense, and totally not by messing this up in slicer once
  • I might want to chamfer or fillet the edge so some Ballpoint Pens can get in that slit better, works fine with pencils (and Mechanical Carpenter's Pencils i'd imagine)
• *A Design Posted to the website Printables by "David Ebersol" Titled "Floating Sticky Note Stencil"
  • Essentially a holder for a Sticky Note Pad and the above stencil
• *A Design Posted to the website Printables by "Arttuys" Titled "Parametric Sticky Note holder and stencil"
• *A Design Posted to the website Printables by "Chillhaus3D" Titled "To Do list stencil"
• *A Design Posted to the website Printables by "Rastl" Titled "Rocketbook Mini Checklist Stencil"
• *A Design Posted to the website Printables by "ToniMichi27" Titled "Upcyclenote"
  • Penholder, Stickynote Holder, and Stencil Holder in one module