Mount Cylinders

• [1] Cut 1/2"X6"x12" plate
• [2] Cut 1/2"x4"x6" plate
• Mag drill or punch [4] 3/4" holes in 6"x12: plate
• Mag drill or punch [2] 1" pin holes on each 4"x6" plate
• Weld 1" drilled out nut onto 4"x6" plates
• Tack [2] plates about 3.5" apart for cylinder mounting
• Weld assembly together with cylinder pin in place (prevents shifting)
• Lay assembly in place on frame, and pin bottom of main cylinder into it
• Pin top of main cylinder into the arm attachment plates
• Pin bottom of secondary cylinder to the arm attachment plates
• Pin top of secondary cylinder to the QA Plate mounts

• Drill cylinder mount plate holes in loader arms
• Mount cylinder plates (2 per arm)
• With loader arms in place, arrange bottom and top mounts, drill holes
• Attach main cylinder to arms
• With main cylinder attached, finetune location of bottom cylinder mount for equal extension of cylinders
• Drill bottom mount locations
• Bolt bottom mounts