CEB Press/Manufacturing Instructions

Main > GVCS > CEB Press > Manufacturing Instructions

---

This page is currently under construction and might undergo drastic changes within a short span of time.

Parts Fabrication

1. Arms - primary
2. Arms - secondary
3. Feet
4. Frame with main cylinder
5. Grate mounts
6. Hopper sheet metal
7. Hopper mounting plate
8. Hopper supports
9. Hoses - Secondary cylinder hose unit
10. Hoses - Shaker and main cylinder
11. Hoses - Main hose unit
12. Legs
13. Roller guides
14. Secondary cylinder
15. Secondary cylinder sensor unit
16. Sensor - Main cylinder
17. Sensor - Secondary cylinder
18. Sensor - Soil
19. Soil grate
20. Soil loading drawer
21. Soil Shaker motor unit
22. Soil Shaker

Manual

• Hydraulic control valve

Automatic

• Controller box and cord
• Solenoid valve
• CEB Press Build Instructions/Detroit Fab Lab Solenoid Driver

Assembly

Final Assembly and Job Site Setup

Firmware

Source code can be found at github: https://github.com/OSE/ceb-controller

Old code:

• CEB Control Source Code v1.01 Annotated
• CEB Control Source Code v1.01
• CEB Control Source Code v1.0

• Control Code Site

Maintenance

CEB Press Testing and Troubleshooting