Office desk
Main > Housing and construction > Home fittings
This is a desk that is designed to be water-jet cut out of one sheet of 23/32 cabinet grade plywood. The desk is approximately 2ft x 4ft and seems to be very stable and is also able to be disassembled. The different parts are pilot drilled with a hand drill and then bolted together using 3/8" x 1-1/4" long lag screws with fender washers. There is no gluing necessary for this desk.
This desk was originaly designed to be used with the "G.T.D." task managment system. The storage compartments will accept a plastic hanging file storage box.
Since this desk is constructed using slots, the 23/32 ply is necessary for this particular .dxf file. In order to reduce costs, for my personal desk I decided not to have the extra embellishments cut out (i.e. the eagle).
This is the dxf file used to cut out the desk using one sheet of 4x8 cabinet grade ply: Media:PLYWOOD DESK.dxf
The Alibre files:Media:rev 2.zip