Bobcat Standard Quick Attach
Background
See LifeTrac_Bobcat_Standard and Quick_Attach_Plate_Standard for background on geometry and discussion of ASTM specification of the geometry.
SAE standard File:Sae j2513.pdf
Justin Log by Justin Downs takes it from here.
Product
Hey Guys I tried again to log into the Wiki but no luck. So here is what I cam up with for the quick attach. It is enough to set a cut list and build a prototype.
Attached is a drawing with the ideas I hashed out to give a reference, a Read me file for any notes and the DXF file with the layout (select layers accordingly, when they are all on it is cluttered).
For the next step it would be good to talk with whomever will fabricate it to lock in the most efficient build based on available parts, especially for the catch mechanism.
Basic layout for quick attach skid steer mech:
To be done:
- Finalize dimensions on actual skid steer, spacing,
fit up etc.. With consideration to the bobcat spacing.
- Finish catch mechanism based on available parts (some
ideas are in the attached drawing).
General notes: Good work, needs specifics of actual skid steer. Needs discussion with Justin.
Files
Update files above by clicking on image or link and upload a new version for basic version control. Each version can be annotated via discussion on that page.