File list
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | User | Description | Versions |
|---|---|---|---|---|---|---|
| 14:19, 28 January 2018 | Cross-dimensions.png (file) |  |
5 KB | Ruslan | 1 | |
| 14:19, 28 January 2018 | Cross.csv (file) |  |
431 bytes | Ruslan | 1 | |
| 11:46, 28 January 2018 | Layer bottom.jpg (file) |  |
1.19 MB | Cabeza de Pomelo | Bottom face of first layer. | 1 |
| 11:44, 28 January 2018 | Base layer.jpg (file) |  |
1.89 MB | Cabeza de Pomelo | Nozzle pattern. Base layer. | 1 |
| 11:43, 28 January 2018 | Layer thickness.jpg (file) |  |
2.24 MB | Cabeza de Pomelo | 0.2mm | 1 |
| 11:39, 28 January 2018 | Three cubes hbp.jpg (file) |  |
2.77 MB | Cabeza de Pomelo | Test cubes. | 1 |
| 11:38, 28 January 2018 | Three cubes.jpg (file) |  |
2.99 MB | Cabeza de Pomelo | Test cubes. | 1 |
| 11:36, 28 January 2018 | Cube bottom.jpg (file) |  |
1.25 MB | Cabeza de Pomelo | Bottom face. Test cube. | 1 |
| 10:06, 28 January 2018 | Cone base.jpg (file) |  |
2.05 MB | Cabeza de Pomelo | Irregularities associated with bubbles under PEI layer. | 1 |
| 10:00, 28 January 2018 | Cone side.jpg (file) |  |
1,020 KB | Cabeza de Pomelo | Too much extrusion? | 1 |
| 09:45, 28 January 2018 | Two cones.jpg (file) |  |
2.78 MB | Cabeza de Pomelo | Two cones. Test. Cone to the right, motor drivers voltage increased to 0.8V Blowing cold air during the last few layers. | 1 |
| 09:42, 28 January 2018 | Two cubes.jpg (file) |  |
2.8 MB | Cabeza de Pomelo | Test cubes number 2 and 3. Number three with less infill and motor driver voltage increased to 0.8V | 1 |
| 04:26, 28 January 2018 | Takacs - PowerCube.fcstd (file) | |
228 KB | Takacsjd | Takacs powercube used for freecad test | 1 |
| 00:54, 28 January 2018 | Lexprinter-v3.png (file) |  |
81 KB | Lex Berezhny | 1 | |
| 00:48, 28 January 2018 | Lexprinter.png (file) |  |
81 KB | Lex Berezhny | 2 | |
| 18:50, 27 January 2018 | Hydrogenice.pdf (file) |  |
272 KB | Marcin | 1 | |
| 18:08, 27 January 2018 | 2"-elbow.jpg (file) |  |
13 KB | Marcin | 1 | |
| 08:36, 27 January 2018 | Create-coupling.fcmacro (file) | |
18 KB | Ruslan | fixes a bug "An incomplete coupling created when no CAD documents were previously opened." | 4 |
| 06:52, 27 January 2018 | Coupling.csv (file) | |
213 bytes | Ruslan | 1 | |
| 06:32, 27 January 2018 | Electricalpanel.png (file) |  |
24 KB | Marcin | 1 | |
| 02:56, 24 January 2018 | 1"-cross.fcstd (file) | |
37 KB | Marcin | 1 | |
| 02:55, 24 January 2018 | 1"-cross.jpg (file) |  |
11 KB | Marcin | 1 | |
| 02:51, 24 January 2018 | 1"-34"-reducer.jpg (file) |  |
5 KB | Marcin | 1 | |
| 02:50, 24 January 2018 | 1"-34"-reducer.fcstd (file) | |
13 KB | Marcin | 1 | |
| 02:44, 24 January 2018 | 1"-pvc-valve.jpg (file) |  |
12 KB | Marcin | 1 | |
| 02:42, 24 January 2018 | 1"-pvc-valve.fcstd (file) | |
541 KB | Marcin | Reduce this size - too large | 1 |
| 02:39, 24 January 2018 | 1"-pvc-tee.fcstd (file) | |
24 KB | Marcin | 1 | |
| 02:37, 24 January 2018 | 1"-pvc-tee.jpg (file) |  |
7 KB | Marcin | 1 | |
| 02:18, 24 January 2018 | Elbowcomp.jpg (file) |  |
26 KB | Marcin | 1 | |
| 02:07, 24 January 2018 | Elbow.png (file) |  |
12 KB | Marcin | 1 | |
| 02:07, 24 January 2018 | 1"-pvc-elbow.fcstd (file) | |
19 KB | Marcin | 1 | |
| 19:51, 23 January 2018 | Freecad-macro-directory.png (file) |  |
104 KB | Ruslan | 1 | |
| 10:40, 23 January 2018 | D3d australia.jpg (file) |  |
2.44 MB | Cabeza de Pomelo | Almost ready to print. | 1 |
| 10:39, 23 January 2018 | Bed points.jpg (file) |  |
2.78 MB | Cabeza de Pomelo | Understanding dimensions | 1 |
| 07:48, 22 January 2018 | X wires to extruder00.jpg (file) |  |
2.65 MB | Cabeza de Pomelo | Routed wires to extruder. | 1 |
| 07:43, 22 January 2018 | Wire nest.jpg (file) |  |
2.88 MB | Cabeza de Pomelo | Wires everywhere. | 1 |
| 07:37, 22 January 2018 | Jumpers microstepping.jpg (file) |  |
3.4 MB | Cabeza de Pomelo | Microstepping jumpers under Pololu drivers. 15x | 1 |
| 07:33, 22 January 2018 | Extruder out.jpg (file) |  |
2.68 MB | Cabeza de Pomelo | Detail of the extruder positioned outside the frame to work on it. | 1 |
| 07:25, 22 January 2018 | X wires to frame00.jpg (file) |  |
378 KB | Cabeza de Pomelo | Wires arriving from extruder to RAMPS. | 1 |
| 07:21, 22 January 2018 | X wires to frame.jpg (file) |  |
1.95 MB | Cabeza de Pomelo | Router for wires coming from extruder to RAMPS. | 1 |
| 07:18, 22 January 2018 | X wires to extruder.jpg (file) |  |
2.33 MB | Cabeza de Pomelo | Attachment to route wires leaving the extruder. | 1 |
| 19:37, 21 January 2018 | Coupling-calculations.png (file) |  |
7 KB | Ruslan | 4 | |
| 17:12, 21 January 2018 | Simple-coupling.png (file) |  |
2 KB | Ruslan | 2 | |
| 15:52, 21 January 2018 | Simple-tee-dimensions.png (file) |  |
2 KB | Ruslan | 1 | |
| 15:32, 21 January 2018 | Tee-dimensions.png (file) |  |
4 KB | Ruslan | 1 | |
| 15:26, 21 January 2018 | Pvc-tee-gui-screenshot.png (file) |  |
54 KB | Ruslan | 3 | |
| 15:25, 21 January 2018 | Pvc-tee-cad-screenshot.png (file) |  |
26 KB | Ruslan | 2 | |
| 05:10, 21 January 2018 | Lex-openscad-wip-frame.png (file) |  |
31 KB | Lex Berezhny | 2 | |
| 21:11, 20 January 2018 | 90-deg-elbow-dimensions.png (file) |  |
2 KB | Ruslan | 1 | |
| 21:09, 20 January 2018 | 90-deg-elbow.csv (file) | |
3 KB | Ruslan | 1 |
