LifeTrac 6 Parts Order

From Open Source Ecology
Revision as of 21:58, 13 August 2013 by Marcin (talk | contribs) (Created page with "Marcin, The Wiki and the website has been down all evening and night, so I don't know exactly the format of the last steel order. Attached are: a) .dxf files for the laser s...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Marcin, The Wiki and the website has been down all evening and night, so I don't know exactly the format of the last steel order. Attached are:

a) .dxf files for the laser steel cutting (bonding plates*, modified pivot plates per our discussion, the quick attach wheel mount plates for the 1 7/8" shaft size, and a .dxf file showing the 30 holes on 4" centers that appear in a 10' 4x4 tube)

The wheel mount plates are also modified per previous discussions, i.e. Holes for option of direct bolting to the 4x4s. The plates that the motor is bolted to were completely incorrect to accommodate the new black hydraulic motors in the shop. I made the corrections and made a new .dxf file (attached).

Marcin, please confirm this order and let Katie know:

  • [48] pieces of 1/2"x8"x16" mild steel plate - Stock Bonding Plate. Note bolt holes are 1-1/8" - intended for 1" bolts.Weight - 17.8 ea or about 855 lb total.
  • [25] pieces of nominal 1/2"x8"x16" mild steel plate - (Modified) Stock Pivot Plate. Note bolt holes are 1-1/8" - intended for 1" bolts. About 385 lb.
  • [20] pieces of 1/4"x4"x4" square tubing - 10' long. 400' total. Note bolt holes are 1-1/8" - intended for 1" bolts, every 4" on center, first hole at 2" from the end on center. Total weight about 2660 lb.
  • [8]
  • [8]
  • [8]
  • [8]
  • [8]
  • [8]
  • [8]
Retrieved from "https://wiki.opensourceecology.org/index.php?title=LifeTrac_6_Parts_Order&oldid=104313"