CEB Press 6 - Controller Module - Software

From Open Source Ecology
Revision as of 19:52, 14 June 2014 by Marcin (talk | contribs)
Jump to navigation Jump to search

Kliment Edition - Test Code

Download test code - File:Kliment CEB Press Testing.ino

Tracking number is 1ZV92V600490445029. The code that is currently on it is http://pastebin.com/A5ufCkPP . You'll need to install the teensy addons to arduino to be able to program it (at http://www.pjrc.com/teensy/teensyduino.html). I noticed today that I forgot to put a mini-usb cable into the package. You will need a mini-usb cable to change the code. It's currently programmed to just switch the corresponding solenoid on if a button is pressed. The solenoid positive wires are all connected to +12V, the negative wires are individually labeled.

Kliment Edition - Run Code

See Zach Dwiel's prior work - https://github.com/OSE/ceb-controller/tree/master/CEBManual

Retrieved from "https://wiki.opensourceecology.org/index.php?title=CEB_Press_6_-_Controller_Module_-_Software&oldid=120518"