CEB Press 6 - Controller Module - Software
Jump to navigation
Jump to search
Kliment Edition - Test Code
Download test code - File:Kliment CEB Press Testing.ino
<iframe src="http://pastebin.com/A5ufCkPP" width=100% height=500> </iframe>
The code that is currently on it is http://pastebin.com/A5ufCkPP . You'll need to install the teensy addons to arduino to be able to program it (at http://www.pjrc.com/teensy/teensyduino.html). I noticed today that I forgot to put a mini-usb cable into the package. You will need a mini-usb cable to change the code. It's currently programmed to just switch the corresponding solenoid on if a button is pressed. The solenoid positive wires are all connected to +12V, the negative wires are individually labeled.
Kliment Edition - Run Code
See Zach Dwiel's prior work - https://github.com/OSE/ceb-controller/tree/master/CEBManual