Cloud Electronics Design Collaboration

From Open Source Ecology
Revision as of 18:29, 13 February 2015 by Marcin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Free for open source projects - https://upverter.com/

Hey Marcin,

These are great questions! We're excited to have you guys on board and help you get started!

  • For general collaborative design at Open Source Ecology (OSE), there are several features of Upverter that will help you. See this forum post. [1]
  • for sprints/hackathons, here are some specific tips -http://forum.upverter.com/t/tips-for-using-upverter-at-your-hardware-hackathon/893].
  • For board fab, I recommend OSHPark - [2]. We've fabbed hundreds of boards through them. Just grab the gerbers .zip from your Upverter project page and upload it directly to Oshpark. There are more suggestions for board fab here - [3].
  • Yes you can absolutely import your Eagle designs. Instructions are here - [4]. I tested your FET16 project and it imported for me without any issues.
  • If you have any more questions, feel free to use the support forum - [5] - and we'll get back to you ASAP!

Cheers,

Anandh

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cloud_Electronics_Design_Collaboration&oldid=125962"