Prusa i3 Development

From Open Source Ecology
Revision as of 22:55, 19 January 2016 by Marcin (talk | contribs)
Jump to navigation Jump to search

Process

  • Forum message - what's the Best Workshop Kit for a 3D printer workshop? 1 day build workshop, as high quality as possible.
  • SD card or wireless - what additional cost is there?
  • We identify the kit

FreeCAD Files

  • See search - [1]

Selection

<html></htm<iframe src="https://docs.google.com/presentation/d/194yjcF-Nk5P-wWkNLZduG910FuK_HnFIApBTexUDjxo/embed?start=false&loop=false&delayms=3000" frameborder="0" width="960" height="569" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe>l>

Original Work

  • Version used in Prusa workshops - see Readme for source - [2]

Links

  • Prusa i3 Buyer's Guide from RepRap - [3]
  • Classifieds - Missouri - [4]

Sourcing with Shipping

  • Under $350 for full kit, shipping is 3-5 days - [5]. Uses J Head Nozzle. Ships "i3 rework" design: [6]
    • Review of Replikeo [7]
    • Replikeo BOM - [8]

Sourcing Issues

  • According to [9] - cheap chinese J Head counterfeits do not work - so make sure the hot end works
  • J Head exists from the original manufacturer - $56 - but shipping is a flat rate. Takes 48 hours to ship, but shipping method is unspecified. Need to contact seller to see if they can provide fast shipping.

Communication

  • Josef (Prusa),

We will be doing a Prusa i3 workshop March 19.

1. Can you share some of your expertise in running workshops - do you have your process documented anywhere?

2. Which source of the Prusa i3 do you recommend as the best version to use for a workshop?

3. Are you in a position to/ interested in coming to the USA to run a workshop with OSE?

Marcin