Prusa i3 Build

Software

This is the 3D printer of the first iteration of OSE's workshop.

Testing the Live ISO downlaod from D3D Live ISO - I downloaded from the Dropbox since the first link failed to do complete downloads - it would quit about half way.
Creating live USB as in D3D Live ISO. Formatted to EXT4 using Gparted, and opened ISO in Archive Manager. Extracting does not work:

First calibration cube worked well the first time around, with Folgertech_Kit#Build_Instructions. Power supply blew th second time it was turned on - the ground wire was connected to the neutral terminal on the power supply, and the neutral wire was connected to the ground terminal on the power supply. Note: this is interesting in that it worked the first time around - it shouldn't have.