Shelf Mounting Procedure
Jump to navigation
Jump to search
20 Foot Shelves
These are made in two sections of 10' each.
- Mount the 70 lb angle bracket, and the 1' long 2x4 after that on top of the angle bracket using 1.5 " screws from the bottom. Mount the brackets with 2.5 or 3" screws. Use two brackets every four feet with one bracket on the ends. Use a level to keep a level over the 20 feet.
- Mount the 6x board first.
- Mount the 8' plywood strip on back of the two 6" boards, on outside. Do not do this in situ. The ID piece of about 4' long will be cut to size later.
- Also mount the 13.75" strip of plywood on each side.
- Join the two 10 foot sections by the back strip, cut to size. Move the shelf away from the glazing wall to screw in the connecting pievlce.