CEB Press Part Library

From Open Source Ecology
Jump to navigation Jump to search

THIS PAGE IS UNDER HEAVY CONSTRUCTION DO NOT REFERENCE

I am creating this doc for the design sprint on Saturday July 22 @10:55 MST as per slide #2 of the sprint document @ [1] - Dixon

Ceb2016.jpg

Introduction

Conditions of satisfaction for complete CAD for a given project means that we have a complete part library:

  • Parts - for building Modules, Sub-assemblies and for producing Fabrication Drawings
  • Modules - Made of multiple parts, usually used in Sub-assemblies. Modules are used when there is repeated assembly of same or similar parts (like the legs). These are used for Exploded Part Animations, Language Agnostic Instructionals (LAIs), and other work.
  • Sub-assemblies The major components of the final CAD. used for Exploded Part Animations, Language Agnostic Instructionals (LAIs), and other work.
  • Final Assembly - The completed build. for Exploded Part Animations, LAIs. Note that the Final Assembly may have to use Simplified Assets in some cases to remain workable
  • Simplified Assets: Parts, Modules, Assemblies - these are versions with details removed. Some may be grouped to facilitate handling. In some cases they are drawn from scratch as only abstract, blocky models - to save significantly on file size.
  • File Size Requirements - all assets meet File Size Requirements for that particular asset type. Files can't be so large that FreeCAD can't open them or work with them effectively.
  • File Organization - Spreadsheet of all Assets (both Simlified and Complete assets) is available
  • Construction Best Practices - procedures for effective part building in FreeCAD are followed for each file. Each part should be designed at the origin, so symmetries can assist in the design.
  • File Build Documentation - Each file is documented for how to create that file, so novices can get up to speed in making modifications. A short video with voiceover is the best way to document a part build. This is important because this creates design literacy in the general populace.
  • ConstraintsAll the modules and Sub-assemblies are constrained without any Degrees Of Freedom.


HintLightbulb.png Hint: Once all the parts here are stable, we will create a FreeCAD CEB Press Workbench which includes a drag-and-drop of every part within FreeCAD

Index

CEB_Press#Master_Index

Master File

Index:

Embed index

Parts Gallery

Frame Sub-assembly

Main Leg

has to be renamed to Main_Leg_Module" and broken down to parts

  • Leg_front_plate
  • Leg_side_plate
  • Leg_rib

Bottom Rear

has to be renamed to "Bottom_module" and broken down to parts

  • Bottom_Vertical_plate
  • Bottom_Horizontal_plate
  • Bottom_square

Top Panel Module

  • Top_front_planel
  • Top_top_panel
  • Top_bottom_panel


Mid Plates

These have to be made into a "Middle_plates_module"

Individual Parts

  • Chamber Spacer

Arms Sub-assembly

Drawer Sub-assembly

Rod Holder

File:Rod holder.fcstd File:Rod holder.stl


Hopper seat Sub-assembly

Hopper

Crate Sub-assembly


Cylinder Sub-assembly

Secondary Cylinder Sub-assembly


Module 4

Module 6

Module 7

Module 8

Assembled Modules Gallery

Final Assembly Gallery

Simplified Assets Gallery

Retrieved from "https://wiki.opensourceecology.org/index.php?title=CEB_Press_Part_Library&oldid=156862"