Open Source D3D Pick and Place Machiene
Basics
- Part of the Open Source Electronics Construction Set
- A device that picks up a surface mounted componet, places it on a PCB, and solders it into the PCB
- Uses a D3D Universal CNC Axis
Used For
- Fully Automated Finished Circuit Production
- Open Source Systems on a Chip
- Open Source Computer Componets Construction Set
- Open Source Computer Construction Set
- Open Source Server + Networking Construction Set
Industry Standards
- TM220A
Existing Open Source Designs
Minimum Viable Product
- Fast
- Cheap to operate
- Tapeless design
- No part bin filling;large variety and quantity of parts in integrated storage
- Just Hit Print Style Operation
Basic Design
Universal Axis
- Used to move the end effectors around the circuit
- Should be heavy duty
- may want it to bo faster than the usual so it can jut around the cicruit board
Part Storage Module
- ?x Rotary Disks filled with parts
- ?x Rotary Disk Filling Device
- 1x Rotary Disk Control Device
End Effector Modulw
- 1x Vacuum Pump Part Grabber
- 1x Soldering Device
- 1x Solder Paste Dispenser
- 1x Desoldering Device
- 1x Computer Vision Camera
Quick Change Nozzle Storage Module
- 1x Nozzle Storage array (a metal device with notches for various quick change nozzles in increasing apeture order)
- ?x Quick Change Nozzles
Circuit Board Holder Module
- 1x Circuit Board Holder
Control + IO Module
- 1x Arduino
- 1x RAMPS Controller
- 1x Power Source Controller
- 1x Communication Module
BOM
-
See Also
-
Usefull Links
-