Microfactory Boot Camp - Extruder Build

From Open Source Ecology

Revision as of 13:35, 7 September 2018 by Marcin (talk | contribs) (→‎Notes)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Jump to navigation Jump to search

Notes

20:22 in the video - Collet Clip - see E3D Instructions regarding the Collet Clip. Note that because the filament hole in the extruder 3D printed piece is elongated - and the collet clip is elongated - the collet clip should sit in this hole in a way that allows the collet clip to line up with the hole.
24:50 - location of drive gear

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Microfactory_Boot_Camp_-_Extruder_Build&oldid=177596"