Microfactory Boot Camp - Extruder Build

From Open Source Ecology
Revision as of 13:51, 7 September 2018 by Marcin (talk | contribs)
Jump to navigation Jump to search


Notes

  • 20:22 in the video - Collet Clip - see E3D Instructions regarding the Collet Clip. Note that because the filament hole in the extruder 3D printed piece is elongated - and the collet clip is elongated - the collet clip should sit in this hole in a way that allows the collet clip to line up with the hole.
  • 24:50 - location of drive gear
  • 25:29 - placing extruder cover on top of the extruder
  • 25:53 - fan nuts in cover need to be placed inside extruder cover
  • 29:37 - motor attachment
  • 31:36 - tensioner with m40 screws
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Microfactory_Boot_Camp_-_Extruder_Build&oldid=177599"