Microfactory Boot Camp - Software Toolchain for 3D Printing

From Open Source Ecology
Revision as of 00:38, 11 September 2018 by Marcin (talk | contribs) (→‎Notes)
Jump to navigation Jump to search


Notes

  • Beginning - examples of useful 3D prints in aquaponics and building materials
  • 2:37 - Toolchain uses the Arduino - you upload software from your computer to the A?rduino, and then you use Cura to control the 3D printer. Alternately, you can use an SD card to 3D print without using a dedicated computer.
  • 4:20 - Open hardware is live and thriving with the Open Compute project - which is a good example of how open source hardware reduces costs drastically in the telecom industry.
  • 7:21 - Download Arduino Environment v1.6.8 - programming environment for OSE Marlin
  • 9:29 - Settings to modify within Marlin
  • 12:20 - We use D3D Lulzbot Cura as the software for controlling the 3D printer.
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Microfactory_Boot_Camp_-_Software_Toolchain_for_3D_Printing&oldid=177853"