Simple 3D Printer BOM

This is a simplified version of the OSE 3D Printer:

1. Small 6" bed
2. Bed is not heated. Don't need PEI, large power supply, or MOSFET
3. One Z axis with cantilevered Z axis
4. Retains the RepRap Discount Smart Controller for easy interface
5. 3D printed linear bearings - since we are still using our strong motors, there should be no issue with using PLA printed linear bearings even if there is extra friction
6. Smaller power supply, as there is no need to heat the bed
7. Frame is PVC with 3D printed corners
8. Need to design axis holders that clamp onto the PVC for mounting the Y and Z axes
9. 3D printed control panel mount
10. Needs to determine a workable, low cost extruder

edit