Extruder Troubleshooting

From Open Source Ecology
Revision as of 16:48, 1 November 2018 by Marcin (talk | contribs) (Created page with "IF extruder is not feeding and it clicks: #Get up to temperature and push filament through #Examine if filament just oozes out - easy and uniform, thick as normal, rushes rig...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

IF extruder is not feeding and it clicks:

  1. Get up to temperature and push filament through
  2. Examine if filament just oozes out - easy and uniform, thick as normal, rushes right down
  3. If that work then go to the extrude through Cura
  4. Get it up to temperature
  5. Do an extrusion through Cura
  6. If it works, then try extrusion through the LCD screen - do it under 1 mm move menu
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Extruder_Troubleshooting&oldid=180837"