3D Printer Extruder

Working Doc

edit

Print Cooling Fan

Adding a print cooling fan. Use these part libraries

Part Library

• 

  [1] D3D Extruder Holder. File:Motor interface.fcstd , File:Motor interface.stl

• 

  File:5015blower.fcstd Blower.

• 

  File:Nema17face.fcstd Nema 17 Faceplate sketch.

• 

  File:Titanaeromarcin.fcstd Marcin's Titan Aero sensor holder - not finished. Finished STL - File:Titanaeromarcin.stl

• To this, add a fan mount for a print cooling fan - File:Fanwithholderpattern.fcstd
• 
• Aleph Objects has produced a FreeCAD version of the Titan Aero extruder - [1]. See Mirrored_aero_assem.fcstd file. Note this is not what we use, but a mirror image - there are 2 versions of the Titan Aero.

• Overall library - [2]
• 8 mm sensor - [3]
• 8 mm sensor holder - [4]
• Heater block only - [5]
• Unmirrored Titan Aero extruder - [6]

Download in FreeCAD format - [7]