3D Printer Extruder
Jump to navigation
Jump to search
Working Doc
Print Cooling Fan
Adding a print cooling fan. Use these part libraries
Part Library
[1] D3D Extruder Holder. File:Motor interface.fcstd , File:Motor interface.stl
File:5015blower.fcstd Blower.
File:Nema17face.fcstd Nema 17 Faceplate sketch
File:Titanaeromarcin.fcstd Marcin's Titan Aero sensor holder - not finished. Finished STL - File:Titanaeromarcin.stl
File:Fanwithholderpattern.fcstd Fan mount for a print cooling fan
[1] Alleph Objects FreeCAD version of the Titan Aero extruder.See Mirrored_aero_assem.fcstd file. Note this is not what we use, but a mirror image - there are 2 versions of the Titan Aero.
- Overall library - [2]
- 8 mm sensor - [3]
- 8 mm sensor holder - [4]
- Heater block only - [5]
- Unmirrored Titan Aero extruder - [6]
Download in FreeCAD format - [7]