File:Universal Tube Builder ADW.FCstd
Jump to navigation
Jump to search
Universal_Tube_Builder_ADW.FCstd (file size: 41 KB, MIME type: application/zip)
Warning: This file type may contain malicious code. By executing it, your system may be compromised.
Notes
Make tubing quickly with this. Just save as your part and use the spreadsheet to enter tube size and length.
Log
- Feb 27, 2019 version opens in FreeCAD, but no tubes are generated.
- Feb 26, 2019 version does not open on FreeCAD v0.16
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 01:56, 28 February 2019 | (41 KB) | Aidan Williamson (talk | contribs) | This should be the same as 26 February file with a couple errors corrected |
| 19:47, 27 February 2019 | (13 KB) | Marcin (talk | contribs) | Barebones tube builder. | |
| 16:22, 26 February 2019 | (39 KB) | Marcin (talk | contribs) | Tube Builder for FreeCAD Legacy 0.16 | |
| 06:40, 23 February 2019 | (63 KB) | Aidan Williamson (talk | contribs) | Added HoleSpacing input to spreadsheet. | |
| 02:32, 6 November 2018 | (54 KB) | Aidan Williamson (talk | contribs) | Outside corner radius formula now reflects reality. 2x the wall thickness - 10% of wall thickness | |
| 02:22, 6 November 2018 | (55 KB) | Aidan Williamson (talk | contribs) | Tubing length now actually works | |
| 01:58, 6 November 2018 | (269 KB) | Aidan Williamson (talk | contribs) | Make tubing quickly with this. Just save as your part and use the spreadsheet to enter tube size and length. |
You cannot overwrite this file.
File usage
The following 3 pages use this file: