D3D Extruder Build Quality Control

From Open Source Ecology
Revision as of 18:12, 5 August 2019 by Marcin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


HintLightbulb.png Hint: This is outdated, valid up to August 2018. See 3D Printer Extruder for later work.

Introduction

Kinesthetic-modular build instructions have built-in logic based on how a machine goes together. That logic - based on modular understanding - is visible to the builder. Procedural instructions are on the other hand dumb. The builder does not see integrated assembly logic. Kinesthetic-modular build instructions begin with understanding of the modular breakdown for a machine.

Build Summary

  • Make magnetic mount against a metal plate
  • Attach magnetic mount with small interior screw.
  • Make hot end. With heater and thermistor and heat paste.
  • Attach print fan with one screw
  • Insert Teflon liner into throat
  • Close body clam shell, keep mag mount loose.
  • Fix print cooling fan
  • Make idler
  • Mount motor and idler
  • Make heigh sensor and install.
  • Attach print cooling fan nozzle
  • Attach heat sink fan
  • Bundle the wires with zip tie.
  • Test thermistor
  • Wire both fans with common positive, and separate negative. Test both fans on power supply
  • Test probe

Documentation

<html><iframe src="https://www.facebook.com/plugins/post.php?href=https%3A%2F%2Fwww.facebook.com%2Fmarcin.jakubowski.378%2Fposts%2F10214201355965012&width=500" width="500" height="650" style="border:none;overflow:hidden" scrolling="no" frameborder="0" allowTransparency="true" allow="encrypted-media"></iframe></html>

Retrieved from "https://wiki.opensourceecology.org/index.php?title=D3D_Extruder_Build_Quality_Control&oldid=195802"