Universal Tool Head Requirements

From Open Source Ecology
Jump to navigation Jump to search

Universal Tool Head Connections

Mechanical Attachment of Toolhead

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQAHptHiKxgcrNrZXHk9RzJaIDotuDmERH_f3oUuRYJOtyfkoKdezRqVxl-YujO9uc5g60LFUGBRIv7/embed?start=false&loop=false&delayms=3000#5" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

edit

Electrical

See Universal Tool Head Electrical Requirements

  1. Wiring is quick plug, MTA-100, 8 pin, 2 of them
  2. Wiring bundle is 22 Ga, 8=stranded connector [1]

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQAHptHiKxgcrNrZXHk9RzJaIDotuDmERH_f3oUuRYJOtyfkoKdezRqVxl-YujO9uc5g60LFUGBRIv7/embed?start=false&loop=false&delayms=3000#2" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

edit

Pen Plotter + Mill requirement:

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQAHptHiKxgcrNrZXHk9RzJaIDotuDmERH_f3oUuRYJOtyfkoKdezRqVxl-YujO9uc5g60LFUGBRIv7/embed?start=false&loop=false&delayms=3000#3" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

edit

Wiring to Universal Controller:

<html><iframe src="https://docs.google.com/presentation/d/e/2PACX-1vQAHptHiKxgcrNrZXHk9RzJaIDotuDmERH_f3oUuRYJOtyfkoKdezRqVxl-YujO9uc5g60LFUGBRIv7/embed?start=false&loop=false&delayms=3000#7" frameborder="0" width="480" height="389" allowfullscreen="true" mozallowfullscreen="true" webkitallowfullscreen="true"></iframe></html>

edit

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Universal_Tool_Head_Requirements&oldid=200470"