Distributed Production Engineering Documentation Protocol

From Open Source Ecology
Revision as of 09:15, 9 January 2020 by Marcin (talk | contribs) (Created page with "=3D Printing= 2 rules: #Document files at the part library, where part library has the FreeCAD and STL #Save the gcode #State the official machine version used. Unofficial ma...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

3D Printing

2 rules:

  1. Document files at the part library, where part library has the FreeCAD and STL
  2. Save the gcode
  3. State the official machine version used. Unofficial machine versions are not supported. An official machine version is accompanied by a specific version of Marlin firmware that is documented for that machine. See Wiki Taxonomy.
  4. Save the printer profile (.ini file)
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Distributed_Production_Engineering_Documentation_Protocol&oldid=208439"