D3D v20.04.27 Future Work

From Open Source Ecology
Revision as of 21:14, 30 April 2020 by Eric (talk | contribs) (Asked for some clarification on some questions I had)
Jump to navigation Jump to search

Future Work

General

  • Simplify Universal Axis from clamshell to monolithic for Motor and idlder side.
  • Retain carriage side, or fix it? Only compelling reason is taking the X axis off. But we could redesign the X so it cna be independent of the Y. If we take off X with 2 bolts, service on X or Y allows for whole X and Whole Y to be taken off easily - the Y does not mix with X.
  • Develop FDM 3D Printer Print Profiles for various materials to make it even more plug and play (less, if any failed prints due to the best settings being pre-determined)
  • D3D Toolchanger and/or D3D Toolheads

Production Engineering

  • Too much cleanup on X-Y joints. Rework the production engineering so that printing can be by default more clean. Probably do a joint between one-piece motor and one-piece carriage.
    • Is any of this due to print settings and/or nozzle size?

Bug Reports

  • fix the Y carrieage to X pieces so both carriages are external.
Retrieved from "https://wiki.opensourceecology.org/index.php?title=D3D_v20.04.27_Future_Work&oldid=219067"