Open Source Door

Doors are expensive. A simple way to build them would be to get foam insulation, and cover it in 20 gauge steel.

• Foam is $2/3 /sf [1]
• 20 ga sheet [2] is about $108 [wiki.opensourceecology.org/wiki/Seed_Home_Interest_Form] for 36"x168" of steel. 24 ga is $74.
• 3D print a nice cover face for the door.
• Fire proof is 16 ga [3]

Cost Analysis

• 3D printed + steel doors get us to about $100 in materials cost with 20 ga. 1/3 of industry standards.
• 90 minute rated start at $350 at 24 ga. [4]. Fire proof (90 minute) starts at around $600 [5].