CEB Press v21.06 Calculations

Cylinder Evaluation

• 5" special cylinders are $500 for one with a rod sticking out 3":
• Is it an option to use 2 cylinders, if they can be mounted effectively? It could make sense if we CNC cut mounting plates as needed.

Pressing Rate

• Same cylinder as before
• Pump all power into large cylinder upon large cylinder motion
• Calculations based on CEB Press v17.08 Calculations, which show 1.52 gallons per cycle.
  • We get 7.1 block per minute.
• In case of 16 hp engine, this works. Add more power, and we have:

• 77 cu in per cycle for small cylinder. Running on 10.6 gpm, we get 32 cycles per minute or