CNC Torch Table v21.08 3D CAD

https://github.com/AmunRa1322/OpenSourceEcology_Files

Part Library

• 

  CNC Torch Table Belt Pinch. - FreeCAD -File:CNC Torch Belt Pinch.stl.

• 

  CNC Torch Table Carriage. - FreeCAD -File:CNC Torch Table Carriage.fcstd. File:Carriage1.stl. Latest update on Gitlab - [1]

• 

  CNC Torch Table Idler. - FreeCAD -File:CNC Torch Table idler2.FCStd - stl - File:CNC Torch Table Idler5.stl. Updated 10/1/21 idler on Gitlab - [2]

• 

  File:Nema23motor.fcstdNema 23 motor.

• 

  File:Bearing 1in.fcstd

• 

  Gitlab Source. Newer version is in FreeCAD - File:Newquickmotor.fcstd. STL file - File:Motorpiece1in.stl. New gcode at gitlab - [3]

Gcode for Marlin Universal v20.04, running on D3D Universal v3

• File:Motor1in.gcode
• File:Carriage1in.gcode
• File:Idler1in.gcode

More

• Cable Chain - . File:Cablechainlarge.fcstd. File:Cablechainlarge.stl. File:Cablechainlarge.gcode.zip.
• Bed Hold - . File:Bedhold.fcstd. File:Bedhold.stl - note - needs update for extra chamfer. Use latest FreeCAD file.
• Rod Test File with bushing - File:1inchrodtest.fcstd. With bushing it is 1.25". Add 0.1" to make it 1.35" diameter. STL - File:1inchrodtest.stl
• Rod Test File without bushing - File:1inchrodtestnobushing.fcstd. General rule: add 0.1" to diameter for 1.2mm nozzles. D=1.1"
• Rod spacing template - 1/8" by 3.5" full hole - File:Spacingtemplate.fcstd
• Test file for outside holes - File:Outsideholes.fcstd
• Bushing template - File:1inchbushingtest.fcstd

Links

• CNC Torch Table v21.08