1" Crown Staples
Jump to navigation
Jump to search
- Up to 15 fires per second in bump mode. [1]
- Practical controllable rate is 3-6 per second for long production runs. [2]
- Freeman PWC50 uses 13 cfm for 100 staples per minute at 90 psi. [3]
- Real world framing is 50 nails per minute in production. [4]. Needs 7.5 cfm per person. Limiting factor is?
- In the real world, about 10% of framing time is trigger time - with 90 percent divided by measuring, material handling, and positioning. By far it is setup in usual crews. [5]
Solve time constraints by Measureless Design, 3D Printing and Robotics for handling, and Poka-Yoke for positioning - and you have Extreme Design-Build.
