Test Power Cube on Tractor

From Open Source Ecology
Revision as of 21:44, 18 June 2011 by Marcin (talk | contribs) (Created page with "*Mount Power Cube on one tractor with another tractor or with a hoist *Mount Power Cube on Tractor *Connect return line hose, power hose, return line case drain7 *Rumble!! **Chec...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • Mount Power Cube on one tractor with another tractor or with a hoist
  • Mount Power Cube on Tractor
  • Connect return line hose, power hose, return line case drain7
  • Rumble!!
    • Check pressure with pressure gauge on hydraulic take-off channel
    • Set pressure for 1500 psi for regular operation, and 2000 psi for hilly terrain
    • Test onflat ground
    • Test slopes- tractor should be able to navigate any slope with one 27hp power cube
    • FeF industry standard is a 1 cu in pump at 3500 rpm
    • Determine speed
    • If more speed is needed, use a hydraulic pump larger than 1 cu in. With one power cube, tractor will drive faster, but will stall going up steep inclines
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Test_Power_Cube_on_Tractor&oldid=31519"