Build Fuel Tank

From Open Source Ecology
Revision as of 22:20, 18 June 2011 by Marcin (talk | contribs) (Created page with "*Cut 1/4"x4"x8*fuel tank with cold cut saw, band saw, or torch *[2] Cut tank ends - 1/4"x4"x8" flats *Spray paint patter of filler cap ontop *Torch filler cap hole *Drill screw ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • Cut 1/4"x4"x8*fuel tank with cold cut saw, band saw, or torch
  • [2] Cut tank ends - 1/4"x4"x8" flats
  • Spray paint patter of filler cap ontop
  • Torch filler cap hole
  • Drill screw holes for filler cap
  • Determine fuel line orientation - with Chris
  • Torch hole for fuel line
  • Weld fuel hole bung
  • Weld bottom and top onto fuel tank
Retrieved from "https://wiki.opensourceecology.org/index.php?title=Build_Fuel_Tank&oldid=31538"