Build Fuel Tank
Jump to navigation
Jump to search
- Cut 1/4"x4"x8*fuel tank with cold cut saw, band saw, or torch
- Clean edges, clean out inside of debris
- [2] Cut tank ends - 1/4"x4"x8" flats
- Spray paint pattern of filler cap on top tank closure
- Torch filler cap hole
- Drill screw holes for filler cap
- Fuel line is located at middle bottom of 8" face of tank - torch it out
- Cut a 1/4" fitting for fuel line
- Grind and ream all edges to be welded prior to welding
- Weld fuel line fitting (1/4" npt)
- Weld bottom and top onto fuel tank