CEB Press Design Rationale, Product Ecology

Design Rationale

The design objective for the OSE CEB was to produce the simplest, high performance, lifetime design, design-for-disassembly machine - made with stock and minimum-machined parts - at the lowest possible cost. The design follows OSE Specifications

The OSE CEB press is a vertical press, where soil falls by gravity directly from the hopper into the compression chamber. The main cylinder compresses soil, and the soil loading drawer closes/opens the compression chamber and ejects bricks from the machine. ( Hydraulic Design)

Improvements Made

• See machine specifications from last year.
• The main addition to the CEB machine design since last year is the increase of machine height from an 8" to a 12" main pressing cylinder, so that the resulting bricks are (2"-6")x6"x12" as opposed to the (2"-4") bricks.

Improvements Needed

• The machine is currently moved into place by forks, but a trailer will be added to improve mobility.
• Sides will be added to the grate to prevent soil from falling off the grate
• Flat bar will be used instead of rebar as the grate to facilitate soil falling through the grate.

Product Ecology

Construction Product Ecology

Product Ecology
CEB Press

From	Uses	Creates	Enables
Induction Furnace Welder CNC Torch Table Ironworker Components	Power Cube Tractor Earth	CEB Bricks	Workshop Greenhouse HabLab