LifeTrac IV/Research Development/QA plate

From Open Source Ecology
Jump to navigation Jump to search

Overview

These tasks are to determine what is required to adopt the Bobcat standard for the quick attach (QA) plate. The rational is that there are many existing Bobcat tools existing and it would be useful to be able to utilize them with the LifeTrac without requiring a QA Conversion Plate.

Other Names: Bob-Tach, Universal Skid Steer Quick Attach Plate

Tasks

  1. Get dimensions and critical features of the current Bobcat standard
    1. Mount Dimensions - SAE J2513
  2. Redesign the current QA plate to the Bobcat standard with OSE principles of available manufacturing technologies
    1. Very Good DIY Instructions - Use this as the start. Contacted creator and there is no problem republishing on OSE.
  3. Determine mating tool tolerance and feature requirements
    1. Commercial Weld-on Solution
    2. Mount Dimensions - SAE J2513 - Not sure if latest version but looks good
  4. Provide a redesign of the mounting surfaces on the soil pulverizer
Retrieved from "https://wiki.opensourceecology.org/index.php?title=LifeTrac_IV/Research_Development/QA_plate&oldid=51199"